Ameritron Extended Warranty Plan

Ameritron's extended warranty plan is the same as the original warranty, just extended for the amount of months described on your purchase invoice.

The extended warranty warrants to the purchaser that if the product should fail during the agreed term, Ameritron has the option to repair or replace part(s) (except tube and output transistors) and provide necessary labor free of charge.

Warranty repair can only be done at the Ameritron facility. Purchaser must return defective product to Ameritron prepaid in its original packing or equivalent. Ameritron is not responsible for any loss or damage due to shipping.

• Necessary labor done at the Ameritron facility to repair the product back to specifications.
• Electrolytic capacitor
• Modification to correct performance
• Chip capacitors
• Mica capacitors
• Ceramic capacitors
• Air tuning capacitors
• Transformers
• Coils
• Resistors
• Meters
• Switches
• Chokes
• Sockets
• Tube caps
• Insulators
• Transistors (except for final RF output transistors)
• Diodes
• IC
• Regulators
• Rectifier
• Relays
• Fans
• Fuse Holders
• PC Board (if not repairable)
• Connectors
• Internal Wiring
• Internal Coax
• Return shipping and labor for replacing tubes or final RF output transistors (tubes and RF output transistors are not covered under warranty)
• Return shipping (within the United States at Ameritron's choice of shipping) with insurance at replacement cost is covered for services listed under "WHAT IS COVERED"

• Repairs done by unauthorized Ameritron facility
• Returning of product to Ameritron facility
• Shipping and labor to replace light bulbs and fuses accessible by the owner
• Parts damaged due to shipping damage
• Parts damaged due to misuse, neglect, intentional, accidental, or improper installation
• Cosmetic defects, dents, scratches, peeling, rusting, corrosion and chips
• Maintenance and cleaning
• Flood, fire, lightning and any other act of nature
• PA tubes and RF Output Transistors (shipping and labor are covered)
• Unauthorized modifications made to the product
• Returning of product with no problem detected
• RETURN shipping is NOT covered on products sent in for services listed under "WHAT IS NOT COVERED"

Contact Ameritron's Service Facility by phone, fax, or e-mail as soon as the problem occurs. The following information will be required when contacting Ameritron:

• Extended Warranty Plan Invoice Number
• Extended Warranty Plan Number
• Product Model Number
• Serial Number
• Brief description of the problem

Our phone number is (662) 323-8211. Our fax number is (662) 323-6551. Our email address is ameritron@ameritron.com.

Return defective product to Ameritron Service Facility, with insured prepaid postage in its original packing or equivalent (original packing can be purchased from Ameritron). Ameritron is not responible for loss or damage during shipping. Enclose a brief description of the problem with a return address and telephone number. Contact factory before shipping. The shipping address is Ameritron, 116 Willow Road, Starkville, MS 39759.

If your Ameritron product is still within its original warranty: Contact Ameritron by phone, fax, mail or e-mail with model of product, serial number, date of purchase and dealer purchased from.

If your Ameritron Product was purchased used or is out of its original warranty: The Ameritron product will need to be sent to Ameritron's production facility pre-paid shipping for evaluation. The owner agrees to pay for return shipping charges, necessary parts and labor to put the product back to the original Ameritron specifications. Ameritron has the right to not provide an Extended Warranty Plan.